Your shopping cart is empty!
Column Guard™ System Spec Sheet
Column Guard™ System
Patents 6,173,809 • 6,439,344 • 6,688,427 and others pending.
Low cost and useful where the Beamguard™ cannot be
used due to obstructions on the top of flanges. Convenient
for walking eave struts, purlins, or rafters to connect
iron, set purlins and hoists, install insulation, metal decking,
roofing, HVAC, roof vents, skylights, etc. nique design of
post minimizes hardware and eliminates the need for shock
absorbers in the cable, making installation simple with less
adjustment. Offset outboard or inboard of beam surface to
allow for free movement even while carrying purlins, joists,
tools or materials along a beam. Rafter Guard™ is
mounted to the rafters as you erect them — the post
position allows for the roof and flashing to be installed
while fully protected. Install two sets on beam lines
and use a cable between two sets for crossing interior
floor beams and joists. Leave on the building from
initial erection until the building is closed in. Standard
size mounts to any column over 4´´ flange
(up to 2-1/8´´ thick) for safety of workers walking
on rafters or purlins to connect beams, rafters, purlins,
and girders. QuickRods™ are interchangeable with
other Preferred Safety Products. Meets OSHA required
fall protection — 15´ ironworkers, 6´ all other trades.
All steel – no nylon or plastic parts to get cut, burned,
or weakened in the sun! Standard shock absorbing
lanyards (i.e. 900 lb. Preferred Safety Series 231, 234 or
equal) or retractables (i.e. Preferred Safety 511RLWD-11 or
520RLCD-20 or equal) may be used on the horizontal lifeline
and two workers may work within any two poles. Other workers
may work on the system as long as poles separate them from
others. Any reasonable number of lightweight intermediate poles
may be used in one line, with an end pole at the terminating end,
and workers can travel long distances. Preferred Safety is proud
to offer products that are designed for and by erectors in the
field. The new system is added to the Guardline™, a total system
that covers virtually all erectors’ exposures. Other products included
in this family are the best-selling Beamguard™, Concrete Guard™,
Bridge and Form Guard™, and Rafter Guard™.
ITEM NUMBER: 360 Column Guard and 360 Instructions 800.301.3188
Print Information
Note and Warning:
Preferred Safety reserves the right to change and improve specifications design configurations, components and details at any time without notice. Check with Preferred Safety for any newer versions of products or instructions or warnings during the life of your product. The product is developed in accordance with OSHA standards in effect at the time of manufacturing. Users should remain aware of any changes in Safety and Health Laws or Standards in the Jurisdiction in which the user is operating and using Preferred Safety products.
Copyright ©2010 – Preferred Safety Products, Inc. All rights reserved.
No copying or distribution of these materials are allowed for any purpose except for sales and management uses of our customers on jobs using the system described herein.
Call 800.301.3188 to speak with a representative!
